VTech VT 1932 User Manual page 4

FCC AND IC REGULATIONS
Before installing this equipment, users
should ensure that it is permissible to
be connected to the facilities of the
local telecommunications company. The
equipment must also be installed using
an acceptable method of connection.
The customer should be aware that
compliance with the above conditions
may not prevent degradation of ser-
vices in some situations.
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility, tele-
phone lines and internal metallic water
pipe system, if present, are connected
together. This precaution may be par-
ticularly important in rural areas.
Caution: Users should not attempt to
make such connections them-
selves, but should contact the
appropriate electrical inspec-
tion authority, or electrician,
as appropriate.
Your VT 1932 is designed to operate at
the maximum power allowed by the
FCC . This means your handset and
base unit can communicate only over a
certain distance - which will depend on
the location of the base unit and
handset, weather, and the construction
and layout of your home or office.
4