Kenwood KVR-A90R Instruction Manual page 9

AM/FM CHANNEL SPACE switch (Except some
areas)
The CHANNEL SPACE switch on the rear panel is set to
the correct setting that prevails in the area to which the
unit is shipped. However, if the channel space setting is
not matched to the area where the unit is to be used;
for instance, when you moved from area 1 to area 2 or
vice versa, desired reception of AM/FM broadcasts is
not expected. In this case, change the CHANNEL
SPACE setting in accordance with the area correspon-
ding to the table shown below.
Channel Space Frq.
1. U.S.A., Canada FM: 100 kHz
Hawaii, and Guam AM: 10 kHz
2. European countries FM: 50 kHz
Far East countries AM: 9 kHz
Channel space table
Note:——_—$
When changing the setting of the AM/FM CHANNEL SPACE switch,
turn the POWER switch OFF and ON.
AC outlets
The AC outlets on the rear panel of the unit may be us-
ed to supply power to other components in the system,
such as turntables, tape decks, etc. Never connect
equipment whose power consumption exceeds the
maximum value shown at each outlet.
KVR-A9OR/KVR-A7OR (U.S.A., and
Canadian models)
SWITCHED outlets: This outlet supply power only
when the unit is turned on. The maximum total capaci-
ty is 200 watts.
KVR-A7OR (European model)
SWITCHED outlet: This outlet supply power only
when the unit is turned on. The maximum capacity is
200 watts.
KR-A70 —_-——_____
SWITCHED outlets: These outlets supply power only
when the unit is turned on. The maximum total capaci-
ty (both outlets) is 200 watts.
UNSWITCHED outlet: The outlet provides power
when the unit is plugged into an active AC wall outlet,
regardless of the setting of the POWER switch. The
maximum capacity is 200 watts.
KVR-ASOR/KVR-A7OR/KR-A70 (k) 9