Qwest qw2621 Owner's Manual page 30

In Case Of Difficulty
You hear noise in the Handset, and
none of the keys or buttons work
• Make sure the power cord is
plugged in.
Common cure for electronic
equipment
If the unit does not seem to be
responding normally, then try putting
the Handset in its Base. If it does not
seem to respond, do the following (in
the order listed):
1. Disconnect the power to the Base.
2. Disconnect the Handset battery,
and spare battery
applicable.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery pack(s).
6. Wait for the Handset to re-establish
its link with the Base. To be safe,
allow up to one minute for this to
take place.
pack, if
29