Table of Contents
Advertisement
5
Using the opening pick, disconnect the 2 camera connectors.
Be careful not to damage the near components and camera.
6
Heat the microwaveable heating bag and apply it on front and back side of the rear
camera module for 3 minutes.
It is possible for the device or battery to be damaged by heat.
•
Do not heat the device in a microwave. Doing so could cause an explosion.
•
Follow the heating bag's instructions for heating. The recommended time for
•
heating the bag is 50 seconds in a 1000 W microwave and 70 seconds in a 700 W
microwave. (Correct temperature for use: 55-65 ℃.)
Be careful not to damage the device through excessive heat. (It is
•
recommended to disassemble the device in an area with a temperature gauge.)
Disassembly and Assembly
82
Advertisement
Table of Contents
