5G mmWave Antenna Assembly
Leaving screws inside the device may damage internal components, such as the
battery. During assembly, be extra careful not to leave any unassembled screws
inside the device.
The 5G mmWave antenna is only supplied with United States devices.
1
Before reinstalling the 5G mmWave antenna, you need to replace the adhesive tape
on the 5G mmWave antenna.
2
Remove the clear film from the new adhesive tape and apply it to the bottom of the
antenna with its round end furthest from the connector.
Remove the green film from the adhesive tape.
3
Using the tweezers, insert the 5G antenna module in slot and press down lightly with
your fingers so that the antenna module is fully fitted.
Be careful not to damage the battery.
When assembling the 5G mmWave antenna module, be careful not to bend it.
Disassembly and Assembly
123