Table of Contents
Advertisement
16
Heat the microwaveable heating bag additionally and apply it on the bottom left
edge of the screen for 3 minutes.
17
Place the suction cup in the left of the bottom edge of the screen, lift upwards, and
then insert the opening pick in the gap at the bottom left edge.
Be careful when inserting the opening pick too deeply as this could damage the
internal circuitry, leading to problems such as abnormal operation of the screen.
In case of the bottom edge side of the screen, very weak circuits are located very
close to the edge. Just insert only about 1 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
73
Advertisement
Table of Contents
