Thermostat - Airstream FLYING CLOUD 2024 Owner's Manual

Thermostat

There is one thermostat for each rooftop air
conditioner installed on your Airstream� Only one of the
thermostats, typically the main living area, controls the
furnace and heat pump + furnace modes�
Please refer to the thermostat manufacturer's
manual for operating instructions and to
troubleshoot onboard diagnostic fault codes
and flashing icon codes. The manual can be found in
your owner's packet or by scanning this QR code to
visit https://www�geappliances�com/
navigate to the Owner's Center to download a manual�
The following tables provide quick start instructions and
are subject to change with new product developments
and improvements�
2024 Flying Cloud
OFF
FAN ONLY
COOL
HEAT PUMP
ONLY
HEAT PUMP +
FURNACE
FURNACE
where you can
FAN ON
AUTO FAN
TEMP
HOLD BOTH
MODE BUTTON
The air conditioner and furnace will
not operate�
The fan will operate to circulate air�
The rooftop unit will operate to lower
the temperature�
The rooftop unit's heat pump will
operate to raise the temperature�
The heat pump will enter lockout
mode when the outside temperature
drops below 25°F� If the outside
temperature is expected to drop
below 25°F, it is recommended to
set the thermostat to HEAT PUMP +
FURNACE or FURNACE only�
To conserve LPG, the rooftop unit
will first operate the heat pump to
raise the temperature� The furnace
will be turned ON if the interior
temperature drifts more than 3
degrees from the setpoint (see
TEMP button below)�
The furnace will automatically turn
on if the outdoor temperature drops
below 25°F or if the heat pump
begins to defrost�
The furnace will operate to raise the
temperature�
FAN BUTTON
The fan will run continuously, even
when the setpoint is reached�
The fan will automatically turn off
once the set point is reached�
TEMP BUTTONS
Controls the set point� Press to set
+ / -
the desired temperature�
Switches between Fahrenheit and
Celsius�
Interior
5-21