Setting The Volume; Audio Playback In Bluetooth® Mode; Setting Sound Effects; Setting The Treble/Bass - Medion LIFE P61450 User Manual

. Setting the volume
Press the VOL + / VOL - buttons on the soundbar or on the remote control to set the
volume:
Press the VOL+ button to increase the volume or the VOL button to decrease
the volume.
Press the MUTE button on the remote control to mute the device.
Press the MUTE button again to restore the audio output.
. Audio playback in Bluetooth® mode
If you have connected the soundbar to a device that supports the ADP and AVRCP
profiles (Audio Video Remote Control), the soundbar is used as an output medium
and all audio signals are only output via the soundbar.
If you have connected the soundbar to your Bluetooth-enabled mobile
phone, the music playing through the soundbar is interrupted when
you receive a call, and only continues when you finish the call.
Press the button on the remote control to start playing tracks.
To pause playback, press the
playback.
During playback, press the
Press the button to skip to the next track.
. Setting sound eff ects
Press the FLAT, MOVIE or MUSIC buttons on the remote control to switch the
MOVIE or MUSIC sound effects on and off (FLAT).
. Setting the treble/bass
Press the BASS+ key to increase the depths or the BASS key to decrease the
depths.
Press the TREB+ button to increase the treble or the TREB button to decrease
the treble.
. Cleaning
Do not use solvents, corrosive or gaseous cleaning agents. Only use a dry cloth/
microfibre cloth to avoid damaging the surface.
Furniture is often coated with varnishes or plastics which are cleaned with a wide
range of cleaning agents. Some of these cleaning agents contain ingredients which
might damage the device's base material, and cause it to become soft.
If necessary, place an anti-slip mat under the device's base.
button again. Press this button again to resume
button once to skip to the start of the track.
DE
FR
NL
ES
IT
EN
