Connecting External Devices; Connecting An External Device Via Aux - Medion LIFE P61450 User Manual

If the Pairing LED is flashing, the automatic connection has failed. To connect the
devices manually, proceed as follows:
Switch on the soundbar.
Press and hold the PAIR button
ing LED flashes rapidly.
Press and hold the SOURCE button
The connection process then starts automatically. The operating LED
soundbar flashes green and the pairing LED
as soon as the connection between the soundbar and the subwoofer has been suc-
cessfully established.
If a television or other audio output device is connected via the AUX or
HDMI ports, the soundbar switches on automatically after a few seconds
if the television or audio output device is switched on.
If the connection to the television or audio output device is disconnect-
ed, the soundbar will switch off automatically after approx.  minutes.
If the volume on the television or the audio output device is set too low,
the soundbar will switch off after approximately  minutes (but only if
the devices are connected via AUX).
. Connecting external devices
You can connect a wide range of different audio output devices to the soundbar,
such as a television, MP or CD player, receiver, computer etc.
Switch off all the devices before connecting them to each other.
Also comply with the information in the user manual for the particular
device you want to connect to the soundbar.
.. Connecting an external device via AUX
... Audio cable with  x . mm diameter jack plugs
You will need an audio cable with  x . mm diameter jack plugs to connect an
audio output device to the soundbar using the headphone output socket on the
output device.
Connect the jack plug to the soundbar's AUX socket
Insert the other jack into the headphone output socket on the audio output de-
vice.
... Audio cable with cinch plugs
You will need an audio cable, with cinch plugs,  x . mm jack plug ->  x cinch
plugs to connect an audio device to the soundbar using the cinch outputs on the
audio output device.
Connect the jack plug to the soundbar's AUX socket
on the back of the subwoofer until the pair-

on the soundbar.

on the subwoofer is constantly lit

on the

.

.

DE
FR
NL
ES
IT
EN
