Applications - Observator Instruments Analite NEP-9500-PLUS Series Manual

1

Applications

Analite NEP-9500 probes typical use includes applications such as:
1. Monitoring of streams and rivers
2. Monitoring of water storage bodies including stratification studies
3. Intermediate and final effluent treatment monitoring
4. Hydrological run off studies
5. Ground and bore water analysis
6. Drinking water filtration efficiency
7. Industrial process monitoring
8. Sludge and dredge monitoring
9. Sediment load monitoring
Which model is best used is dependent on the application, the measuring environment, the logging
equipment and the monitoring period (deployment times) required.
The Analite turbidity probes are not suitable in situations where they may be abraded by large particles
such as sand and under these circumstances the reading may become erratic due to the large particles
passing the optic sensor. Measuring turbidity under these circumstances will require a stilling well to allow
the sand particles to settle away from the optic sensor in the probe tip.
Manual | NEP-9500-PLUS series turbidity probe
Status: Final | Not confidential
Page 5 | 21
V20200309