6.2.2.7. Installation of Shading Sheet
6.2.2.8. Installation of L Mount
Screw (C)
Mount
Rubber
6.2.2.9. Installation of Shading Frame
Screw (A)
1. Install Shading Sheet to Ring Mount Base Unit
Mount Contact
The matte surface is the back side.
1. Install Mount Rubber
2. Install L Mount
3. Tighten screw (C) by using the torque driver with specified torque.
- Screw(C) × 5
- Torque : 20±1.2Ncm
Screw (B)
1. Install Shading Frame and tighten screw (A) by using the torque
driver with specified torque.
- Screw(A) × 3
- Torque : 10±1Ncm
7mm
4. Fix Lens Contact unit to
L Mount by tighten screw(B)
using torque driver with
specified torque.
- Screw(B) ×2
- Torque : 6±1 Ncm
SILVER