Before Use - Black & Decker BXCG151E Instructions For Use Manual

• Blades are sharp and could cause harm, be careful and
avoid direct contact with the blades' cutting edges. Pay
special attention when handling the blades, during as-
sembly and disassembly operations and during cleaning.
• Do not touch any of the appliance's moving parts while it
is operating.
• Exercise precaution after employing the stop operation on
the appliance, as the blades will continue moving from the
effect of their own mechanical inertia.
• Do not leave the appliance out in the rain or exposed to
moisture. If water gets into the appliance, this will in-
crease the risk of electric shock.
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if it is empty.
• Do not use the appliance if the on/off switch does not
work.
• Do not move the appliance while in use.
• Do not turn the appliance over while it is in use or con-
nected to the mains.
• Do not force the appliance's work capacity.
• Respect the Max level.
• This appliance is for household use only, not professional,
industrial use.
• Store this appliance out of reach of children and/or per-
sons with physical, sensory or reduced mental or lack of
experience and knowledge.
• Do not store or transport the appliance if it is still hot.
• Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed. Make sure
there are no broken parts or anomalies that may prevent
the appliance from operating correctly.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• Do not use the appliance for more than two cycles for
each load of coffee beans. Allow the appliance to rest at
least one minute between each cycle. Under no circum-
stances should the appliance be operated for more time
than necessary.
DESCRIPTION
A Coffee bean hopper lid
B Removable upper burr blade
C On/off Button
D Cup selector knob
E Ground coffee holder
F Coffee bean hopper
G Coarseness selector knob
H Base
I Cleaning brush
J Body
INSTRUCTIONS FOR USE

BEFORE USE

• Make sure that all products' packaging has been re-
moved.
• Before using the product for the first time, clean the parts
that will come into contact with the coffee as described in
the «Cleaning» section.
• Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used, light
smoke may be detected. After a short time, this smoke
will disappear.
CAUTION
• Always operate the grind with the safety lid (A) securely
in place.
• Keep hands and utensils out of the coffee hopper while
grinding and when the appliance is plugged in.
• Make sure there are no foreign bodies in the coffee beans
before grinding.
• Ground coffee holder (E) and its lid must be correctly
positioned in the grinder.
USE
• Fully unroll the appliance's power cable before each use
• Fit the ground coffee holder (E) and its lid in their correct
positions. Check that the assembly is correctly positioned
in the body.
• Remove the coffee bean hopper lid. (Fig. 1).
• Put coffee beans into the coffee bean hopper. (Fig. 1).
• Do not fill above the MAX level.
• Put on the coffee bean hopper lid and make certain it is
correctly positioned. (A).
5