Repairs; Environmental Protection; Technical Specifications - Metabo MAG 32 Original Instructions Manual

17026972_0610 MAG 32 MAG 50.book Seite 17 Dienstag, 15. Juni 2010 4:55 16
J Universal cutting spray
K Weldon adapter, 19 mm, on thread ½" x 20
UNF
L Geared chuck with thread ½" x 20 UNF
M Adapter Weldon, 19 mm, on Fein Quick In
For a complete range of accessories, see
www.metabo.com or the main catalogue.

11 Repairs

Have your power tool repaired by a qualified elec-
trician. This power tool complies with the appli-
cable safety regulations. Repairs must only be
carried out by qualified electricians and using orig-
inal spare parts; otherwise the user faces a risk of
accidents.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault when
sending the tool for repairs.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately
and handed in for environmentally compatible
recycling.

13 Technical Specifications

Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
T = Tool attachment
M = Max. torque
D = Max. diameter (core drill bit)
max, C
D = Max. diameter (spiral drill bit)
max, S
D = max. diameter (tap)
max, T
P = Nominal power input
1
P = Power output
2
n = Speeds at rated load
1
H = Max. stroke
max
H = Height (incl. motor) with slide plate in
u
bottom position
H = Height (incl. motor) with slide plate in
o
top position
A = Dimensions of magnetic flux
m = Weight without mains cable
A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty (noise level)
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 61029.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
17