Table of Contents
Advertisement
Problem
Ensure that connection to the device is correct and that all cables are fully inserted.
Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible.
There is no picture/
sound or distorted
Restart the connected devices by unplugging each device's power cord and then plugging it in again.
picture/sound from
If "No Signal" is displayed on the TV, ensure that the correct input source has been selected.
an external device
When using a 4k playback device, ensuer the cable is a High-speed HDMI cable and adjust settings > Device
Preferences > Inputs > HDMI EDID version setting.
Ensure the volume is not muted. If it is, press the VOL+ button to restore the sound.
Check the volume level of the external device.
If earphones are connected, unplug them.
Ensure that connection to the external audio device is correct and that all cables are fully inserted.
Ensure correct input source and audio settings have been selected on the external audio device.
There is no/
Move the TV away from electronic equipment or devices that could cause interference.
distorted/delayed
sound
When using an external audio device via a HDMI cable, ensure that the device supports HDMI-ARC and, if applicable,
the ARC setting is turned On (refer to the connection guide in the user manual of the connected device).
When using an external audio device via an optical cable, check that the Settings > Device Preferences > Sound >
Digital Output is set to "PCM".
If the TV sound is not synchronised with the picture, adjust the applicable Settings > Device Preferences > Sound >
SPDIF Delay.
Adjust Settings > Device Preferences > Inputs > HDMI EDID version setting.
Solution
TROUBLESHOOTING | 45
Advertisement
Table of Contents
