Honda CR-V Hybrid 2024 Owner's Manual page 568

■
Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is
pressed. You can use this system while the vehicle is temporarily stopped, like at
traffic lights and in heavy traffic.
■
Turning on the system
Comes
On
Automatic Brake Hold Button
■
Activating the system
On
Comes
On
U.S.
Comes
On
Brake Pedal
Canada
Fasten your seat belt properly, then turn the
power system on. Press the automatic brake
hold button.
u The automatic brake hold system
indicator comes on. The system is turned
on.
The system is in the previously selected on or
off setting each time you fasten the driver's
seat belt and turn the power system on.
Depress the brake pedal to come to a
complete stop. The transmission must not be
in P or ( ( R .
u The automatic brake hold indicator
comes on. Braking is kept for up to 10
minutes.
u Release the brake pedal after the
automatic brake hold indicator comes
on.
1Automatic Brake Hold
WARNING
3
Activating the automatic brake hold system
on steep hills or slippery roads may still
allow the vehicle to move if you remove
your foot from the brake pedal.
If a vehicle unexpectedly moves, it may
cause a crash resulting in serious injury or
death.
Never activate the automatic brake hold
system or rely on it to keep a vehicle from
moving when stopped on a steep hill or
slippery roads.
WARNING
3
Using the automatic brake hold system to
park the vehicle may result in the vehicle
unexpectedly moving.
If a vehicle moves unexpectedly, it may
cause a crash, resulting in serious injury or
death.
Never leave the vehicle when braking is
temporarily kept by automatic brake hold
and always park the vehicle by putting the
transmission in
brake.
Continued
uuBrakinguBrake System
and applying the parking
P (
567