uuIndicatorsu
Indicator
Name
U.S.
Parking Brake and
Brake System
Canada
Indicator (Amber)
(Amber)
POWER SYSTEM
Indicator
READY Indicator
EV Indicator
100
On/Blinking
Comes on if there is a problem with a system
●
related to braking other than the
conventional brake system.
Comes on if there is a problem with the
●
electric parking brake system and/or the
automatic brake hold system.
Comes on if there is a problem with the
●
radar sensor.
Indicator may come on temporarily when the
●
Maximum Load Limit is exceeded.
Comes on if the brake system is deactivated
●
temporarily after the 12-volt battery has
been disconnected, then re-connected.
Comes on if there is a problem with the
●
electric vehicle system.
Comes on when the vehicle is ready to drive.
●
Comes on when the vehicle is moved by the
●
motor, and the engine is not operating.
Explanation
Comes on while driving - Avoid high speeds and
●
sudden braking. Take the vehicle to a dealer
immediately.
Stays on constantly - Avoid using the parking
●
brake and have your vehicle checked by a dealer
immediately.
Make sure the total load is within the Maximum
●
Load Limit.
2 Maximum Load Limit P. 435
Stays on constantly - Have your vehicle checked by
●
a dealer.
Drive a short distance at more than 12 mph (20
●
km/h). The indicator should go off. If it does not,
have your vehicle checked by a dealer.
Stays on constantly - Have your vehicle checked
●
by a dealer immediately.
Do not drive displays on the driver
●
information interface - Immediately stop in a safe
place and contact a dealer.
2 Turning on the Power P. 445
—