Maintenance; Cleaning The Tool - Makita UR007GM101 Instruction Manual

Chisel blade
For UR006G only
Optional accessory
CAUTION:
Never cut trees larger than 50 mm
diameter.
The chisel blade is useful for cutting shrubs and trees.
To avoid kickback, always apply the segment of the
chisel blade between 8 and 11 o'clock to a tree.
► Fig.47: 1. 8 to 11 o'clock segment of the blade
For ease of cutting a tree, support the protector against
the tree stem as illustrated.
► Fig.48

MAINTENANCE

WARNING:
Always be sure that the tool is
switched off and battery cartridge is removed
before attempting to perform inspection or main-
tenance on the tool. Failure to switch off and remove
the battery cartridge may result in serious personal
injury from accidental start-up.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Cleaning the tool

Clean the tool by wiping off dust, dirt, or cut off grass
with a dry cloth or one dipped in soapy water and wrung
out. To avoid overheating of the tool, be sure to remove
the cut off grass or debris adhered to the vent of the
tool.
Replacing the nylon cord
WARNING:
diameter specified in this instruction manual.
Never use heavier line, metal wire, rope or the
like. Failure to do so may cause damage to the tool
and result in serious personal injury.
WARNING:
head from the tool when replacing the nylon cord.
WARNING:
nylon cutting head is secured to the housing
properly as described in this instruction manual.
Failure to properly secure the cover may cause the
nylon cutting head to fly apart resulting in serious
personal injury.
Replace the nylon cord if it is not fed any more. The
method of replacing the nylon cord varies depending on
the type of the nylon cutting head.
95-M10L
► Fig.49
96-M10L
► Fig.50
Replacing the plastic blade
Replace the plastic blade if it is worn out or broken.
► Fig.51
When installing the plastic blade, align the direction of
the arrow on the blade with that of the protector.
► Fig.52: 1. Arrow on the protector 2. Arrow on the
blade
28 ENGLISH
Use only the nylon cord with
Always remove the nylon cutting
Make sure that the cover of the