If You Subscribe To Dsl Service; Connection - VTech gz2335 User Manual

Installation

Connection

1 . Choose a location for the base near an electrical outlet and telephone jack .
2 . Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit .
Then plug the adaptor into a standard electrical outlet (110V AC) not controlled by a wall switch .
3 . Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to
the wall jack .

If you subscribe to DSL service

If there is interference during telephone conversations and/or your caller ID features are not functioning
properly, install a noise filter to the telephone line between the base unit and the telephone wall jack.
Contact your DSL provider for a noise filter.
AC power adaptor
To single-line
telephone jack(RJ11C)
Telephone line cord
Noise filter (optional)
(For DSL users)
www.vtechphones.com
To power outlet
7