JVC GR-DVL300 Instructions Manual page 49

MENU/BRIGHT Dial
Display
V I D E O M ENU
1 R E T U R N
S O U N D M O D E
1 2 B I T M O D E
+
S Y N C H R O 1 . 0
R E C M O D E
Remote sensor
VCR
(Recording deck)
R.A.EDIT
ON/OFF
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder's remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press the MENU/BRIGHT wheel. The Menu Screen
appears.
5
Rotate the MENU/BRIGHT wheel to select "
press it. "VIDEO MENU" appears. Then, rotate it to
"SYNCHRO" and press it. The value for "SYNCHRO"
is highlighted.
6
Based on the diagnostics performed (
can now advance the VCR's record timing by rotating
the MENU/BRIGHT wheel towards "+". You can also
delay the VCR's record timing by rotating the MENU/
BRIGHT wheel towards "–". The adjustment range is
from –1.3 to +1.3 seconds, in 0.1-second increments.
Press the MENU/BRIGHT wheel to finish the setting.
7
Rotate the MENU/BRIGHT wheel to select
"1RETURN" and press it twice.
Now perform Random Assemble Editing beginning
with step 4 on page 46.
NOTES:
● Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
● Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
TV
49
EN
" and
pg. 48), you