Makita GA049G Instruction Manual page 16

Installing wire cup brush
Optional accessory
CAUTION:
Do not use wire cup brush that
is damaged, or which is out of balance. Use of
damaged wire cup brush could increase potential for
injury from contact with broken brush wires.
Place the tool upside down to allow easy access to the
spindle.
Remove any accessories on spindle. Thread wire cup
brush onto spindle and tighten with supplied wrench.
Fig.24
► 1. Wire cup brush
Installing wire wheel brush
Optional accessory
CAUTION:
Do not use wire wheel brush that
is damaged, or which is out of balance. Use of
damaged wire wheel brush could increase potential
for injury from contact with broken wires.
CAUTION:
ALWAYS use guard with wire
wheel brushes, assuring diameter of wheel fits
inside guard. Wheel can shatter during use and
guard helps to reduce chances of personal injury.
Place the tool upside down to allow easy access to the
spindle.
Remove any accessories on spindle. Thread wire wheel
brush onto spindle and tighten with the wrenches.
Fig.25
► 1. Wire wheel brush
Installing hole cutter
Optional accessory
Place the tool upside down to allow easy access to the spindle.
Remove any accessories on the spindle. Thread the hole cut-
ter onto the spindle, and tighten it with the supplied wrench.
1
Fig.26
► 1. Hole cutter
Installing dust collecting wheel
guard for grinding
Only for model GA049G / GA050G
Optional accessory
With optional accessories, you can use this tool for
planing concrete surface.
ing is only for use in planing concrete surface with a
cup-type diamond wheel. Do not use this guard with
any other cutting accessory or for any other purpose.
vacuum cleaner is connected to the tool and turned on.
Place the tool upside down and install the dust collect-
ing wheel guard.
Mount the inner flange onto the spindle.
Fit the cup-type diamond wheel on the inner flange and
tighten the lock nut onto the spindle.
1
2
4
1
Fig.27
► 1. Lock nut 2. Cup-type diamond wheel 3. Hubbed
16 ENGLISH
CAUTION:
Dust collecting wheel guard for grind-
CAUTION:
Before operation, make sure that a
5
6
cup-type diamond wheel 4. Inner flange 5. Dust
collecting wheel guard 6. Bearing box
1
3