Cleaning And Maintenance; General Information; Cleaning; Cleaning The Automatic Gun - Gema OptiGun GA03 Operating Instructions And Spare Parts List

Cleaning and maintenance

General information

Cleaning

OptiGun GA03
V 12/13
NOTE:
Regular, careful cleaning and maintenance extends the service life
of the OptiGun GA03 Automatic powder gun and ensures long-
lasting, uniform coating quality!
The parts, which are to be replaced during maintenance work, are
available as spare parts. These parts will be found in the
corresponding spare parts list!
WARNING:
All unauthorized modifications to the OptiGun GA03 Automatic
powder gun are forbidden for safety reasons, and exempt the
manufacturer from any liability from resulting damage!

Cleaning the Automatic gun

NOTE:
Before cleaning the powder gun, switch off the control unit. The
compressed air used for cleaning must be free of oil and water!
Daily
1. Blow off the outside of the gun and wipe, clean etc.
Weekly
2. Remove powder hose
3. Remove the spray nozzle from the gun and clean it with
compressed air
4. Blow through the gun with compressed air, beginning from the
connection in flow direction
5. Clean the integrated gun tube with the brush supplied, if
necessary
Cleaning and maintenance • 23