Technical Data - Vents Solo RA1-35 R User Manual

TECHNICAL DATA

The temperature in the room where the indoor unit of the ventilator is installed must be in the range from +1 ˚C to +40 ˚C with relative
humidity up to 65 % (no condensation build-up). If the conditions for using the ventilator are beyond the specified limits, turn off the
ventilator. Provide fresh air supply through windows.
The transported air temperature must be in the range from -15 ˚C to +40 ˚C.
The ventilator is rated as a class II electric appliance.
Ingress protection rating against access to hazardous parts and water ingress is IP24.
The unit design is constantly being improved, thus some models may be different from those described in this manual.
The technical data of the specific model are indicated on the label on the ventilator casing.
The figure below shows the overall dimensions of the indoor unit of the ventilator and the minimum wall thickness sufficient for mounting
the internal components of the ventilator inside the air duct.
150
Ventilator model
Solo RA1-35 R
Solo RA1-35 R V.2
Solo RА1-50 R V.2
Solo RА1-60 R V.2
www.ventilation-system.com
150
Overall
Air duct diameter
A
dimension
150
175
205
35
Dimensions [mm]
Diameter of the hole in the wall for
D
mounting the ventilator
106
131
156
305 – 380 (700*)
ø106
D1
120 – 125
145 – 150
170 – 175
Minimum possible wall
L
thickness
305
325
355
5