Sony CECHP06 Quick Reference page 6

Getting started
02
Setting up the PS3™ system
Procedure fl ow for setting up the
system
Step 1: Connect to a TV.
m
Step 2: Connect digital audio
devices.
m
Step 3: Connect an Ethernet
cable.
m
Step 4: Connect the AC power
cord.
m
Step 5: Perform initial setup of
the system software.
6
Step 1: Connect to a TV
Video output on the PS3™ system
Page 6
The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual
for the TV in use to check which video mode is supported.
1 2
Video mode * *
Page 9
Aspect ratio
* 1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for
"progressive". Using progressive results in high-quality video with minimal fl ickering.
Page 10
2
* SD resolution varies depending on the model of the PS3™ system in use and the content that is being played.
3
* The video output setting on the system will display as "Standard (NTSC)".
4
* The video output setting on the system will display as "Standard (PAL)".
Screens showing the difference in resolution
Page 11
Page 11
HD screen
HD
(High Defi nition)
1080p 1080i
16:9 16:9
SD screen
SD
(Standard Defi nition)
480p
720p
576p
16:9
16:9
4:3
480i * 3
576i * 4
16:9
4:3