Table of Contents
Advertisement
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
DESCRIPTION
Supply voltage range, V
IN(DC)
Short duration input voltage range,
(2)
V
IN(short)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
DC input voltage range, V
IN(DC)
Output voltage range, V
O
Output voltage range, V
O
Maximum cell balancing current,
each cell
Junction temperature, T
J
Storage temperature, T
STG
(1)
Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply
functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If
outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully functional, and
this may affect device reliability, functionality, performance, and shorten the device lifetime.
(2)
Stresses applied above V
stresses may occur during brief transient events but DC voltages in this range should not be applied.
6.2 ESD Ratings
V
Electrostatic discharge
(ESD)
V
Electrostatic discharge
(ESD)
(1)
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2)
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Copyright © 2023 Texas Instruments Incorporated
PINS
(2)
BAT, REGSRC
VC1 – VC5, BAT, REGSRC, CHG
ALERT, SCL, SDA
TS
(2)
SRP, SRN
(2)
VC5
(2)
VC4A
(2)
VC4B
(2)
VC3A
(2)
VC3B
(2)
VC2
(2)
VC1
VC0
(2)
CHG
DSG
REGOUT
VC0 – VC5
and below V
should be limited to less than 100 hours over the lifetime of the device. These
IN(DC)
IN(SHORT)
Product Folder Links:
(1)
Maximum of VSS–0.3
Maximum of VSS–0.3
Maximum of VSS–0.3
Maximum of VSS–0.3
Maximum of VSS–0.3
Maximum of VSS–0.3
Maximum of VSS–0.3
Human-body model (HBM), per ANSI/ESDA/
(1)
JEDEC JS-001, all pins
Charged-device model (CDM), per ANSI/ESDA/
(2)
JEDEC JS-002, all pins
BQ76905
SLUSE97 – NOVEMBER 2023
MIN
MAX
VSS–0.3
VSS+40
VSS+45
VSS–0.3
VSS+6
VSS–0.3
2.1
VSS–0.3
2.1
VSS+40
and VC4A–0.3
VSS+40
and VC4B–0.3
VSS+40
and VC3A–0.3
VSS+40
and VC3B–0.3
VSS+40
and VC2–0.3
VSS+40
and VC1–0.3
VSS+40
and VC0–0.3
VSS–0.3
VSS+6
VSS–30
VSS+40
VSS–0.3
VSS+20
VSS–0.3
VSS+6
50
–65
150
–65
150
VALUE
±1000
±250
Submit Document Feedback
BQ76905
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
mA
°C
°C
UNIT
V
V
5
Advertisement
Table of Contents
