KTM 250 SX F PRADO 2020 Setup Instructions page 14

2 SETUP
12
–
Press the spring with special tool
Footrest spring plier (79029083000)
The special tool is applied to area
–
Mount pin
F01632-10
–
Mount the washer and split pin
F01633-10
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
F01637-10
Guideline
Screw, frame protec-
tor
–
Mount the cable ties.
(PRADO)
–
Install the motor guard. (
–
Remove the seat. (
–
Remove the air filter box cover. (
–
Route the diagnostics connector and the positive cable
upwards towards the 12-V battery.
–
Position diagnostics connector in holder
–
Install the air filter box cover. (
F01635-10
bl
.
G
bo
.
bp
.
bq
with the washers.
M5 3 Nm (2.2 lbf ft)
br
.
M5 3 Nm (2.2 lbf ft)
p. 19)
p. 17)
p. 18)
bs
p. 19)
on the footrest.
.