Instructions For Use - PowerXL SmartSynx TO67D5-2SP Owner's Manual

Instructions for Use

Before First Use
Read all material, warning stickers, and labels.
1.
Remove all packing materials, stickers, and labels from the appliance.
2.
Please go to www.prodprotect.com/powerxl to register your warranty.
3.
Before initial use, wipe the inside and outside of the appliance with a warm,
4.
moist cloth and mild detergent. Handwash all cooking accessories.
Place appliance on a heat-resistant surface or use heat protection. Do not
5.
place the appliance on a surface that is not heat resistant. Ensure that the
appliance is used in an area with adequate air circulation. Do not place on the
stove top.
Before cooking food, preheat the appliance for a few minutes to allow the
6.
appliance to burn off the manufacturer's protective coating of oil. Wipe the
appliance with warm, soapy water and a dishcloth after this burn-in cycle.
Using the Appliance
Plug the appliance into a dedicated electrical outlet.
1.
Place your ingredients on your chosen accessory. Slide the accessory into
2.
one of the rack locations in one of the ovens. Close the appliance's door.
TIP: If you are using a cooking function that includes preheating, you can add
food to the appliance after preheating has finished.
Press the Oven Button that matches the oven you want to use. Press one of
3.
the Cooking Function Buttons. You can turn the Control Knob left or right to
adjust the cooking time and temperature if needed. Press the Control Knob
to alternate between the cooking time and temperature.
SMARTSYNX: If you are cooking food in both ovens and want the food
4.
to finish cooking at the same time, press the SmartSynx Button instead of
pressing the Start Button. The oven with the longer cooking time will begin
cooking food first, and 30 seconds before the cooking timers match, the
appliance will beep six times to let you know to add food to the second oven.
Press the Start Button to begin the cooking process. You can press the Stop
5.
Button at any point to stop. Once stopped, pressing the Start Button again
will resume the cooking process.
NOTE: Pressing the Stop Button will only stop the cooking process in the
oven that is selected. Press and hold the stop button for 3 seconds to stop the
cooking processes in both chambers.
The appliance will beep when the cooking process is complete. The
6.
accessories will be hot, so use heat-resistant oven mitts to transfer the
accessories to a heat-resistant surface.
14
TO67D5-2SP_30387_ES_IB_B.indd 14 TO67D5-2SP_30387_ES_IB_B.indd 14 12/8/23 5:28 PM 12/8/23 5:28 PM