Yamaha R7 2024 Owner's Manual page 24

Instrument and control functions
Quick shifter indicator "QS" (if
equipped)
4
1
1. Quick shifter indicator "QS" (if equipped)
This indicator comes on when the
quick shifter is turned on.
Multi-function display
1
1. Multi-function display
The multi-function display is equipped
EAU93021
with the following:
 an odometer (ODO)
 two tripmeters (TRIP 1 and TRIP 2)
 a fuel reserve tripmeter (TRIP F)
 an instantaneous fuel consump-
tion display (km/L, L/100 km, or
MPG)
 an average fuel consumption dis-
play (AVE_ _._ km/L, AVE_ _._
L/100 km, or AVE_ _ _._ MPG)
 a coolant temperature display (_ _
°F)
 an air temperature display (Air_ _
°F)
Use the "SEL" switch to change the
display in the following order:
EAU93031
ODO → TRIP 1 → TRIP 2 → TRIP F →
km/L or L/100 km or MPG → AVE_ _._
km/L or AVE_ _._ L/100 km or AVE_ _._
MPG → _ _ °F → Air_ _ °F → ODO
TIP
 The fuel reserve tripmeter appears
only when you are low on fuel.
 Use the "RES" switch to change
the display in the reverse order.
Odometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at "999999"
and cannot be reset.
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and then hold the "RES" switch until it
is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter "TRIP F" and starts counting the
distance traveled from that point.
4-6
EAU86891
EAU89142
EAU89152