Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker BCD382
Summary of Contents for Black & Decker BCD382
- Page 1 ® BCD382 www.blackanddecker.com.au www.blackanddecker.co.nz...
-
Page 4: Intended Use
Intended use Your BLACK+DECKER BCD382 - 2 speed drill, has been designed for screwdriving applications and for drilling in wood, metal and plastic. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings,... - Page 5 (Original instructions) ENGLISH Do not use any adapter plugs with earthed (grounded) g. If devices are provided for the connection of dust power tools. Unmodified plugs and matching outlets will extraction and collection facilities, ensure these are connected and properly used. Use of dust collection reduce risk of electric shock.
-
Page 6: Safety Instructions For All Operations
ENGLISH (Original instructions) Safety Instructions for All Operations 5. Battery tool use and care a. Recharge only with the charger specified by the Wear ear protectors when impact drilling. Exposure to manufacturer. A charger that is suitable for one type of noise can cause hearing loss. -
Page 7: Residual Risks
(Original instructions) ENGLISH Noise and Vibration Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. The declared noise and vibration emission values stated in Hold power tool by insulated gripping surfaces when the technical data and the declaration of conformity have been performing an operation where the cutting accessory measured in accordance with a standard test method provided may contact hidden wiring. - Page 8 ENGLISH (Original instructions) In case of skin or eye contact, follow the instructions 6. LED work light below. 7. Belt hook (Available in all versions) Warning! The battery fluid may cause personal injury or 8. Battery damage to property. In case of skin contact, immediately rinse 9.
-
Page 9: Important Charging Notes
(Original instructions) ENGLISH After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The light flashes in the pattern indicated on the label. Leaving the battery in the charger The charger and battery pack can be left connected with the LED glowing indefinitely. -
Page 10: Hints For Optimum Use
ENGLISH (Original instructions) Operating Instructions To select low speed, high torque setting (position 1), turn tool off and permit to stop. push gear shifter button 1 (5). To select Trigger switch & reversing button (fig. F) the high speed, low torque setting (position 2), turn tool off and permit to stop, push gear shifter button 2 (5). -
Page 11: Troubleshooting
Warning! Before performing any maintenance on the tool, remove the battery from the tool. Unplug the charger before cleaning it. BCD382 - drill Regularly clean the ventilation slots in your tool and Black & Decker declares that these products described under charger using a soft brush or dry cloth. - Page 12 Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA408220 12/2023...