Intended use Your BLACK+DECKER BCD383 - impact drill, has been designed for screwdriving applications and for drilling in wood, metal, plastic and masonary. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings,...
Page 4
ENGLISH (Original instructions) Do not use any adapter plugs with earthed (grounded) g. If devices are provided for the connection of dust power tools. Unmodified plugs and matching outlets will extraction and collection facilities, ensure these are connected and properly used. Use of dust collection reduce risk of electric shock.
Page 5
(Original instructions) ENGLISH Safety Instructions for All Operations 5. Battery tool use and care a. Recharge only with the charger specified by the Wear ear protectors when impact drilling. Exposure to manufacturer. A charger that is suitable for one type of noise can cause hearing loss.
ENGLISH (Original instructions) Noise and Vibration Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. The declared noise and vibration emission values stated in Hold power tool by insulated gripping surfaces when the technical data and the declaration of conformity have been performing an operation where the cutting accessory measured in accordance with a standard test method provided may contact hidden wiring.
Page 7
(Original instructions) ENGLISH In case of skin or eye contact, follow the instructions 6. LED work light below. 7. Belt hook (Available with all units) Warning! The battery fluid may cause personal injury or 8. Battery damage to property. In case of skin contact, immediately rinse 9.
ENGLISH (Original instructions) After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The light flashes in the pattern indicated on the label. Leaving the battery in the charger The charger and battery pack can be left connected with the LED glowing indefinitely.
ENGLISH (Übersetzung der ursprünglichen DEUTSCH (Original instructions) Anweisungen) Dual range gearing (Figure I) Be sure to securely tighten the screw (11). The dual range feature of your drill allows you to shift gears Operating Instructions for greater versatility. To select low speed, high torque setting (position 1), turn tool off and permit to stop.
Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth. BCD383 - impact drill Regularly clean the motor housing using a damp cloth. Black & Decker declares that these products described under Do not use any abrasive or solvent-based cleaner.
Page 11
(Original instructions) ENGLISH These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact Black & Decker at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black &...
Page 12
Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA408221 12/2023...