VocoPro DVX-880 Owner's Manual page 27

Setting Up Preferences
2. Digital Audio Setup
2.1 RAW
SPDIF OFF: No digital audio output
SPDIF/ RAW: Digital audio output in RAW format. Normally used for DTS and Dolby Digital 5.1 signals
SPDIF/ PCM: Digital audio output in PCM format. Normally used for audio CD signal
3. Dolby Digital Setup
3.1 Dual Mono
STEREO: Audio playback is standard L/R stereo
L-MONO: The right, guide vocal channel is removed, and replaced with a duplicate, instrumental left channel.
(Only on Multiplex format CD+G discs)
R-MONO: The left channel is removed, and replaced with a duplicate right channel of all vocals.
(Only on Multiplex format CD+G discs)
MIX-MONO: Audio playback is in LR/LR mode, also known as virtual stereo.
3.2 Dynamic
Dynamic mode automatically raises the volume of quieter music and lowers the volume of louder music.
ON: Dynamic feature is on
OFF: Dynamic feature is off
4. Channel Delay
Adjusts the amount of delay for each digital 5.1 channel. This is used to synchronize the speakers in your
surround-sound setup.
21