VocoPro DVG-555K Owner's Manual page 9

Getting connected cont
Connecting to a Dolby Digital/DTS Receiver/Decoder
Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable, connect one
end to the appropriate jack on the DVG-555K (Coaxial or Optical) and the other end to the appropriate jack
on the AC-3 decoder/receiver (Coaxial or Optical). If you have both coaxial and optical inputs on your AC-3
decoder/receiver, it is recommended to use an optical connection as those cables eliminate the possibility of
EMI (electromagnetic interference). If your Dolby Digital Receiver does not have a built-in AC-3 decoder, and
has 5.1 channel RCA inputs, you can use the 5.1 channel output jacks on the DVG-555K. Either method will
provide for AC-3 decoding.
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs or refer to the instruc-
tions below for each connection (digital and analog).
MIC MASTER
VOLUME
MALE FEMALE
STAND BY/ON
POWER
Connecting to a Dolby/Digital/DTS Receiver/Decoder
DTX-9900K
Digital Karaoke
Mixer/Amp
MIC MASTER
VOLUME
MALE FEMALE
KARAOKE
STAND BY/ON
ECHO DELAY FEEDBACK EFFECT CHANNEL LANGUAGE INPUT BASS TREBLE DSP MODE MEMORY RECALL CALL
MODE MODE MASTER MENU
POWER
b # DISPLAY
AUTO AUTO
Connecting both Analog and Digital Audio
8
DTX-9900K
Digital Karaoke
Mixer/Amp
DTX-9900
MUSIC VOLUME
KARAOKE
ECHO DELAY FEEDBACK EFFECT CHANNEL LANGUAGE INPUT BASS TREBLE DSP MODE MEMORY RECALL CALL MIC IN
MODE MODE MASTER MENU
b #
DISPLAY
AUTO AUTO
DTX-9900
MUSIC VOLUME
MIC IN