Table of Contents
Advertisement
Getting Connected
Coaxial
Use the Coaxial output for connecting digital audio to a device with a coaxial
input.
What you will need:
• 1 Digital Coaxial cable**
• An audio input device with a Digital Coaxial audio input jack such as a digital
receiver or mixer
1. Connect one end of the Coaxial cable to the COAXIAL output jack on the
rear panel of the DVG-777K
2. Connect the other end of the Coaxial cable to a Coaxial input jack on a
receiver, mixer, etc.
** Although it is alright to use standard RCA cables, it is recommended that you use Digital RCA audio
cables for optimum digital signal quality.
Video Connections
Connecting Video Using the RCA Video Output
What you will need:
• 1 RCA video cable (usually labeled yellow)
• A TV, video monitor or video mixer with an RCA video input
1. Connect one end of the RCA video cable to the yellow RCA VIDEO output
on the rear panel of the DVG-777K
2. Connect the other end of the RCA video cable to an RCA video input jack
on a TV, monitor or video mixer
S-Video
What you will need:
• 1 S-Video Cable
• A TV, video monitor or video mixer with an S-Video input
1. Connect one end of the S-Video cable to the S-Video output on the rear
panel of the DVG-777K
2. Connect the other end of the S-Video cable to an S-Video input jack on a
TV, monitor or video mixer
NOTE: When using the S-Video output, the DVG-777K must be set to
S-VIDEO output. See "Changing the Video Output Mode" in the Operations
section of this manual for detailed instructions on setting the DVG-777K to
S-VIDEO Mode.
10
��������
���� �����
���������
���� �����
�����
���� �����
��������
���� �����
�� �� �������
���� �����
��������
���� �����
Advertisement
Table of Contents
