Table of Contents
Advertisement
2. Press button Start/Pause
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pause
appliance, you can cancel or
change the set of the delay
start.
13.9 Cancelling the delay
start
To cancel the delay start:
1. Press button Start/Pause
the appliance to pause.
The related indicator flashes.
2. Press button Delay Start
repeatedly until the display shows .
3. Press button Start/Pause
to start the programme immediately.
13.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press button Start/Pause
The related indicator flashes.
2. Change the option set.
3. Press the button Start/Pause
again.
The programme continues.
13.11 Cancelling a running
programme
1. Press button On/Off
programme and to deactivate the
appliance.
2. Press button On/Off
activate the appliance.
Now, you can set a new washing
programme.
.
to start the
to set
again
.
to cancel the
again to
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
13.12 The ProSense load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause
button, the maximum declared load
indicator goes off, the indicator
flashes, the ProSense starts the laundry
load detection:
1. The appliance detects the load in the
first 30 seconds: the indicator
the time dots flash, the drum rotates
shortly.
2. At the end of the load detection, the
indicator
goes off and the time
dots stop flashing. The programme
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause
the programme again. The ProSense
phase can be repeated up to three times
(see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
ENGLISH
25
and
is
button to start
Advertisement
Table of Contents
