AEG L8FEE945R User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L8FEE945R
  6. User manual
AEG L8FEE945R User Manual

AEG L8FEE945R User Manual

Hide thumbs Also See for L8FEE945R:
Table of Contents

Advertisement

Quick Links

Download this manual
L8FEE945R
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L8FEE945R

Summary of Contents for AEG L8FEE945R

  • Page 1 L8FEE945R User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    17. QUICK GUIDE......................43 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 9 kg (refer to the •...
  • Page 5 ENGLISH • Do not install or use a damaged • Do not touch the mains cable or the appliance. mains plug with wet hands. • Do not install or use the appliance • Do not pull the mains cable to where the temperature can be less disconnect the appliance.

  • Page 6: Product Description

    • Do not touch the glass door while a including reset software, door, door programme operates. The glass can hinge and seals, other seals, door get hot.

  • Page 7: Technical Data

    ENGLISH 3.2 Appliance overview 11 12 Worktop Drain hose Detergent dispenser Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter Feet for levelling the appliance The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).

  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 5. Carefully put the appliance down on its rear side. 9. Remove the power supply cable and 6. Put the front polystyrene packaging the drain hose from the hose holders. element on the floor under the appliance. It is possible to see Make sure not to water flowing from the damage the hoses.
  • Page 10 We recommend that you keep the packaging and the transit bolts for any movement of the appliance. The appliance must be level and stable. 5.2 Installation on suspended A correct adjustment of the flooring appliance level prevents the vibration, noise and the...
  • Page 11 ENGLISH You can extend the drain hose to maximum 400 cm. Contact the authorized 45º 45º service centre for the other 20º 20º drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
  • Page 12 6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 5.6 Electrical connection The end of the drain hose must always be ventilated , At the end of installation you can i.e.

  • Page 13: Accessories

    Only appropriate 6.3 Pedestal with the drawer accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 6.2 Stacking kit...

  • Page 14: Control Panel

    7. CONTROL PANEL 7.1 Control panel description 11 10 Programme dial Anti-Allergy touch button (Anti- Display Allergy) Delay start touch button (Delay Start) Steam Plus touch button (Plus Steam) Time saving touch button (Time Spin reduction touch button (Spin) Save) •...
  • Page 15 ENGLISH 7.2 Display Maximum load indicator. The indicator flashes during the laundry load estimation (refer to ProSense load detection paragraph) . Maximum laundry indicator. It blinks if the laundry amount exceeds the declared load. Door locked indicator. Delay start indicator. The digital indicator can show: •...

  • Page 16: Dial And Buttons

    Spin speed indicator. Rinse hold indicator. Quiet indicator. Temperature indicator. The indicator appears when a cold wash is set. 8. DIAL AND BUTTONS 8.1 On/Off When the display shows the indicators , the appliance does not Pressing this button for a few seconds heat the water.
  • Page 17 ENGLISH turns regularly to reduce creasing. You The relevant indicator goes on in the must drain the water to unlock the display. door. • Stains As the programme is very quiet, it is Select this option to pre-treat heavily suitable for use at night time when soiled or stained laundry using stain cheaper electricity tariffs are available.

  • Page 18: Programmes

    8.7 Delay Start • If your laundry is normally or lightly soiled, it may be advisable to shorten With this option you can delay the start the washing programme. Touch this of a programme in a more convenient button once to decrease the duration.
  • Page 19 ENGLISH Programme Programme description White cotton and fast-coloured cotton. Normally soiled items. The energy consumption decreases and the time of the Eco 40-60 washing programme is extended, ensuring good washing re- sults. White cotton and coloured cotton. Normally, heavily and lightly soiled items.
  • Page 20 Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2.5 kg.
  • Page 21 ENGLISH Programme Default tempera- Reference spin speed Maximum ture Spin speed range load Temperature range 30 °C 1200 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Delicates 40 °C 1200 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Wool/Silk Steam programme...
  • Page 22 Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ Spin ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ ■ Quiet ■ ■ ■ ■ ■ ■ ■ ■ ■ Drain only ■...
  • Page 23 ENGLISH ■ ■ ■ ■ ■ ■ Soft Plus 1) Before setting this option, select a suitable washing programme for the garments. The appliance will performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Syn- thetics washing programme and then the Spin only option).

  • Page 24: Settings

    9.2 Woolmark Apparel Care - Green The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash» provided that the garments are wash- ed according to the instructions issued by the manufacturer of this washing machine.

  • Page 25: Before First Use

    ENGLISH simultaneously until the indicator This option increases slightly the programme duration. comes on/goes off above the indicator. To activate/deactivate this option touch the Temp. button and the Spin button 11. BEFORE FIRST USE 3. Pour 2 litres of water into the During installation or before detergent compartment marked by first use you may observe...
  • Page 26 12.4 Check the position of the CAUTION! flap Washing heavily oiled, greasy stains could cause 1. Pull out the detergent dispenser until damage rubber parts of the it stops. washing machine. 2. Press the lever down to remove the dispenser.
  • Page 27 ENGLISH With the flap in the In case a selection is not position DOWN: possible, no indicator comes • Do not use on and an acoustic signal gelatinous or thick sounds. liquid detergents. • Do not put more 12.6 Starting a programme liquid detergent than Touch the Start/Pause button to start the the limit shown on...
  • Page 28 1. Touch the Start/Pause button to About 20 minutes after the pause the appliance. The related programme start, the indicator flashes. programme duration could 2. Touch the Delay Start button be adjusted again repeatedly until the display shows depending on the capacity the desired delay time.
  • Page 29 ENGLISH 12.10 Interrupting a In the display the related door lock indicator goes off. programme and changing the 2. Open the appliance door. If options necessary, add or remove the items. 3. Close the door and touch the Start/ When the programme is running, you Pause button.

  • Page 30: Hints And Tips

    In any case, the appliance completed, but: empties the water out automatically after • The display shows the indicator , the approximately 18 hours. option indicator and the 12.15 Stand-by option door locked indicator .
  • Page 31 ENGLISH c. press the Start/Pause button. The degree of soiling, wash temperature spin phase continues. and hardness of the water used. • Button up pillowcases, close zippers, • Follow the instructions that you find hooks and poppers. Tie up belts, on packaging of the detergents or cords, shoelaces, ribbons and any other treatments without exceeding...

  • Page 32: Care And Cleaning

    13.5 Water hardness To find out the water hardness in your area, contact your local water authority. If the water hardness in your area is high Use the correct quantity of water or moderate, we recommend that you softener. Follow the instructions that you use a water softener for washing find on the packaging of the product.
  • Page 33 ENGLISH Regularly examine the drum to check for Always obey the instructions limescale. that you find on the The regular detergents already contain packaging of the product. water softening agents, but we recommend to run a cycle with empty 14.7 Cleaning the drum drum and a descaling product Regularly examine the drum to prevent occasionally.
  • Page 34 2. Remove the top part of the additive 14.9 Cleaning the drain pump compartment to aid cleaning. Make sure that all detergent residue is WARNING! removed from the upper and lower Disconnect the mains plug part of the recess. Use a small brush from the mains socket.
  • Page 35 ENGLISH 6. Repeat the steps 4 and 5 until the water stops to flow out. 7. Turn the filter anti-clockwise to remove it. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. 3.
  • Page 36 2. Remove the inlet hose from the 12. Close the pump cover. appliance by loosening the ring nut. When you drain the water with the 3. Clean the valve filter on the back of emergency drain procedure, you must the appliance with a toothbrush.

  • Page 37: Troubleshooting

    ENGLISH 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
  • Page 38 With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
  • Page 39 ENGLISH • Wait until mains supply is stable. The mains supply is unstable. • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. The anti-flood device is on. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.
  • Page 40 Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes "Installation instruction". an unusual noise and • Make sure that the packaging and/or the transit bolts are re- vibrates. moved. Refer to "Installation instruction".

  • Page 41: Consumption Values

    ENGLISH 3. Open the filter flap. 5. Take out the laundry and then close 4. Pull the emergency unlock trigger the appliance door. downward once. Pull it downward 6. Close the filter flap. once again, keep it tensed and, in the meanwhile, open the appliance door.
  • Page 42 Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.

  • Page 43: Quick Guide

    ENGLISH Off Mode (W) Left On Mode (W) 0.30 0.30 The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC . 16.5 Common programmes These values are indicative only. Programme Litres h:mm °C Cottons 2.15...
  • Page 44 • Connect the mains plug to the mains • Pour the detergent and other socket. treatment in the proper compartment • Open the water tap. of the detergent dispenser. • Push the On/Off button to turn the • To start the programme, touch the appliance on (1).
  • Page 45 ENGLISH Programmes Load Product description Cotton and fast-coloured synthetic items. Complete washing programme that, in only 59 5 kg minutes, washes the daily soiled laundry in- OKOPower tensively and ensures a good washing per- formance in a short time. Cotton and synthetic lightly soiled or once 3 kg worn items.
  • Page 48 www.aeg.com/shop...

Table of Contents