AEG L8FS86499 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L8FS86499
  6. User manual

AEG L8FS86499 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L8FS86499
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L8FS86499

Summary of Contents for AEG L8FS86499

  • Page 1 L8FS86499 User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    16. ACCESSORIES......................44 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 9 kg (refer to the •...
  • Page 5 ENGLISH • Do not install or use a damaged • Do not touch the mains cable or the appliance. mains plug with wet hands. • Do not install or use the appliance • Do not pull the mains cable to where the temperature can be less disconnect the appliance.

  • Page 6: Product Description

    • Make sure that all metal objects are including heat pumps, piping and removed from the laundry. related equipment including hoses, valves, filters and aquastops, printed 2.5 Internal lighting circuit boards, electronic displays, pressure switches, thermostats and WARNING! sensors, software and firmware Risk of injury.

  • Page 7: Technical Data

    ENGLISH • Thanks to the Soft Plus option, the the fabric fibres favouring a perfect fabric softener is uniformly spread out softness. in the laundry and deeply penetrates 3.2 Appliance overview 12 13 Worktop Feet for levelling the appliance Detergent dispenser Drain hose Control panel Inlet hose connection...

  • Page 8: Installation

    Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 9 ENGLISH 5. Carefully put the appliance down on its rear side. 6. Put the front polystyrene packaging element on the floor under the appliance. • A (FRONT) = Front of the appliance • B (BACK) = Rear of the appliance 10.
  • Page 10 Make sure that the appliance does not touch the wall or other units. 2. Loosen or tighten the feet to adjust the level. WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.
  • Page 11 ENGLISH 5.3 The inlet hose The red sector in the window «A» shows this fault. 1. Connect the water inlet hose to the back of the appliance. 2. Position it toward left or right depending on the position of the water tap.
  • Page 12 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.

  • Page 13: Control Panel

    ENGLISH Connect the appliance to an earthed The power supply cable must be easily socket. accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
  • Page 14 6.2 Display Laundry weight indicator. The icon flashes during laundry load esti- mation (refer to "PROSENSE load detection" paragraph). Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. Detergent quantity indicator: the value shows the percentage of deter- gent quantity needed.

  • Page 15: Dial And Buttons

    ENGLISH Time saving indicator. Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. Rinse hold indicator. Extra silent indicator. Pre-wash indicator. Stain indicator. Extra rinse indicator. 7. DIAL AND BUTTONS 7.1 Ein /Aus 7.3 Temp. Pressing this button for a few seconds When you select a washing programme, allows to activate or deactivate the...
  • Page 16 The drum turns regularly to reduce • Vorwäsche creasing. Use this option to add a prewash The door stays locked. The drum phase at 30 °C before the washing turns regularly to reduce creasing. You phase. must drain the water to unlock the This option is recommended for door.

  • Page 17: Programmes

    ENGLISH 7.10 Zeitvorwahl button the anti-crease movements stop and the door unlocks. With this option you can delay the start A small laundry load helps to of a programme in a more convenient reach better results. time. Touch the button repeatedly to set the 7.8 Zeit Sparen required delay.
  • Page 18 Programme Programme description Eco 40-60 White cotton and fast-coloured cotton. Normally soiled items. The energy consumption decreases and the time of the washing programme is extended, ensuring good washing re- sults. Baumwolle White cotton and coloured cotton. Normally, heavily and lightly soiled items.
  • Page 19 ENGLISH Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2.5 kg. This programme can also be used as water-repellent restoring cycle, specifically tailored for treating clothes with a hydropho- bic coating.
  • Page 20 Programme Default temperature Reference spin Maximum load Temperature range speed Spin speed range 40 °C 1200 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Wolle/Seide 1 kg Dampf 30 °C 1400 rpm 5 kg 60 °C - 30 °C 1400 rpm - 400 rpm ÖKOPower...
  • Page 21 ENGLISH Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ U./Min. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Flecken ■ ■ ■ Vorwäsche ■ ■ ■ ■ ■ Extra Spülen Anti-Allergie ■...

  • Page 22: Before First Use

    Programme Universal Liquid Uni- Liquid for Delicates Special versal coloureds woollens powder ▲ ▲ Wolle/Seide ▲ ▲ ÖKOPower ▲ ▲ 20 Min. - 3 kg ▲ ▲ Outdoor ▲ ▲ Daunen 1) At temperature higher than 60 °C the use of powder detergent is recommended.

  • Page 23: Daily Use

    ENGLISH the indicator comes on/goes off If you deactivate the on the display. acoustic signals, they You can activate this option: continue operate when the appliance has a malfunction. • After you touch the Start/Pause button: all the buttons and the 10.3 Permanent Extra Rinse programme dial are deactivated (except Ein /Aus button ).
  • Page 24 2. Turn the programme knob to the necessary programme. The programme indicator comes on. The display shows the maximum load, the default temperature, the maximum spin speed, the indicators of the phases making up the programme and the programme duration.
  • Page 25 ENGLISH Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing 4.
  • Page 26 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2. Touch the Zeitvorwahl button repeatedly until the display shows 3. Touch the Start/Pause button again to start the programme immediately. Changing the delay start after...
  • Page 27 ENGLISH E.g. the washing or pre wash phase is If the ProSense phase is already carried out and the water filling is already running: started, the new programme When the phase ends the relevant starts without repeating indicator stops flashing and is steady on. the ProSense phase.

  • Page 28: Hints And Tips

    After five minutes from the end of the • If you have set , the appliance programme, the energy saving function only drains the water. automatically deactivates the appliance. The option indicator goes out, When you activate the while the indicator...
  • Page 29 ENGLISH 12.3 Detergent type and • Turn multilayered fabrics, wool and items with printed illustrations inside quantity out. • Pre-treat tough stains. The choice of detergent and use of • Wash stubborn stains with a special correct quantities not only affects your detergent.

  • Page 30: Care And Cleaning

    12.4 Ecological hints • Set the maximum possible spin speed for the selected washing To save water, energy and to help protect programme before drying your the environment, we recommend that laundry in a tumble dryer. This will you follow these tips: save energy during drying! •...
  • Page 31 ENGLISH 13.3 External cleaning available, run the Maschinenreinigung programme. Clean the appliance with mild soap and warm water only. Fully dry all the 13.6 Door seal surfaces. This appliance is designed with a self Do not use a scouring pads or any cleaning draining system, allowing light scratching material.
  • Page 32 3. Make sure that all detergent residue Always follow the is removed from the upper and lower instructions that you find on part of the recess. Use a small brush the packaging of the to clean the recess. product.
  • Page 33 ENGLISH WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 1. Open the pump cover. 5.
  • Page 34 13.10 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.

  • Page 35: Troubleshooting

    ENGLISH 13.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
  • Page 36 With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
  • Page 37 ENGLISH • Wait until mains supply is stable. The mains supply is unstable. • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. The anti-flood device is on. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.
  • Page 38 Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes "Installation instruction". an unusual noise and • Make sure that the packaging and/or the transit bolts are re- vibrates. moved. Refer to "Installation instruction".
  • Page 39 ENGLISH 14.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. The programme does • Make sure that there is no damaged fuse in the fuse box. not start.
  • Page 40 Problem Possible solution • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the ap- drum.
  • Page 41 ENGLISH After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. 14.3 Emergency door opening To open the door, proceed as follows: 1.

  • Page 42: Consumption Values

    15. CONSUMPTION VALUES 15.1 Introduction This user manual reports two different tables in order to favour a gradual passage from a regulation to the other: • Regulation EU 1061/2010, valid up to 28th of February 2021, is related to the Energy Efficiency classes from A+++ to D, •...
  • Page 43 ENGLISH Eco 40-60 pro- Litres h:mm °C gramme Half load 0.590 2:45 1351 Quarter load 0.190 2:45 1351 1) Maximum spin speed. Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.30 0.30 4.00 Time to Off/Standby mode is 15 minutes maximum. 15.4 According to Regulation 1061/2010 Standard cotton pro-...

  • Page 44: Accessories

    The tumble dryer can be stacked on the top of the washing machine only by using the correct stacking kit manufactured and approved by AEG. Verify the compatible stacking kit by checking the depth of your appliances.
  • Page 45 ENGLISH The stacking kit can be used only with To raise your appliance and make the appliances specified in the leaflet loading and unloading laundry easier. provided with the accessory. The drawer can be used for laundry Read carefully the instructions supplied storage e.g.: towels, cleaning products with the appliance and with the and more.
  • Page 48 www.aeg.com/shop...

Table of Contents