1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L8TE73C
  6. User manual

AEG L8TE73C User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L8TE73C
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L8TE73C

Summary of Contents for AEG L8TE73C

  • Page 1 L8TE73C User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    1369/2017........................31 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    – working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments; areas for communal use in blocks of flats or in – launderettes. Do not exceed the maximum load of 7 kg (refer to the •...
  • Page 5 ENGLISH • Do not install or use a damaged • Do not pull the mains cable to appliance. disconnect the appliance. Always pull • Do not install or use the appliance the mains plug. where the temperature can be less •...

  • Page 6: Product Description

    2.5 Service • Cut off the mains electrical cable close to the appliance and dispose of • To repair the appliance contact the Authorised Service Centre. • Remove the door catch to prevent • Use original spare parts only.

  • Page 7: Control Panel

    ENGLISH 3.2 Appliance overview Control panel Lid push handle Drain pump filter Lever to move the appliance Feet for levelling the appliance Rating plate 4. CONTROL PANEL 4.1 Control panel description 12 11 Aan/Uit push button • Only Spin Programme dial •...
  • Page 8 TPM touch button Temp. °C touch button 4.2 Display Maximum load indicator. The icon flashes during laundry load esti- mation (refer to "PROSENSE load detection" paragraph). Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme.

  • Page 9: Programme Chart

    ENGLISH Child safety lock indicator. Time saving indicator. Temperature indicator. The indicator appears when a cold wash is set. Spin speed indicator. Rinse hold indicator. Extra Silent indicator. Pre-wash indicator. Stain indicator. Extra rinse indicator. 5. PROGRAMME CHART Washing programmes Programme Default Reference...
  • Page 10 Programme Default Reference Maxi- Programme description temper- spin speed ature Spin speed load Temper- range ature range 40 °C 1200 rpm Synthetic items or mixed fabric 60 °C - 1200- 400 3 kg items. Normal soil. Synthetica Cold 30 °C...
  • Page 11 ENGLISH Programme Default Reference Maxi- Programme description temper- spin speed ature Spin speed load Temper- range ature range White cotton items. This programme removes micro-organisms thanks to a washing phase with the temperature maintained above 60°C for several mi- 1300 rpm nutes.
  • Page 12 Programme Default Reference Maxi- Programme description temper- spin speed ature Spin speed load Temper- range ature range Maintenance cycle with hot water to clean and freshen the drum and to re- move residue that may cause odour. For the best result use this cycle once a month.
  • Page 13 ENGLISH ■ ■ ■ Extra Silent ■ ■ ■ Vlekken ■ ■ ■ Voorwas ■ ■ ■ ■ ■ ■ Extra Spoelen ■ ■ ■ ■ ■ ■ ■ Tijd Besparen ■ ■ ■ ■ ■ ■ ■ ■ ■ Only Rinse ■...

  • Page 14: Consumption Values

    6. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand- ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro- gramme duration.

  • Page 15: Options

    ENGLISH 7. OPTIONS 7.1 Introduction If you select the Cotton programme at 40°C or 60°C The options/functions are and no other options are set, not selectable with all the display shows the washing programmes. Check indicator ; these are the compatibility between the standard cotton options/functions and programmes, the most...
  • Page 16 The water of the last rinse is not This option can increase drained out to prevent the fabrics the programme duration from creasing. The washing and is not available with a programme ends with water in the temperature lower than drum and the final spin phase is not 40 °C.

  • Page 17: Settings

    ENGLISH button the anti-crease movements stop At firth touch the appliance and the lid unlocks. proposes the default setting of the washing programme A small laundry load helps to again. reach better results. 7.10 Plus Steam 7.11 Startuitstel This option adds a steam phase followed With this option you can delay the start by a short anti-crease phase at the end of a programme in a more convenient...

  • Page 18: Before First Use

    • To activate/deactivate this option This option adds two rinses and the touch the Extra Spoelen button and display shows the Extra button simultaneously the relevant indicator comes on/goes off. 9. BEFORE FIRST USE 1. Connect the mains plug to the mains 5.
  • Page 19 ENGLISH Detergent compartment for prewash phase. The marks MAX are the maxi- mum levels of the quantity of detergent (powder or liquid). When you set a programme with a stain, add detergent (powder or liquid). Detergent compartment for washing phase. The marks MAX are the maxi- mum levels of the quantity of detergent (powder or liquid).
  • Page 20 • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid then the maximum level.
  • Page 21 ENGLISH 10.11 Cancelling a running Important! If the laundry amount will not be reduced, the washing programme programme starts anyway, despite the overload. In this case, it will be not possible to 1. Press button Aan/Uit to cancel the guarantee the best washing results. programme and to deactivate the appliance.

  • Page 22: Hints And Tips

    10.15 End of cycle 1. If necessary, decrease the spin speed. When the programme has finished, the 2. Press the Start/Pauze button. appliance stops automatically. The The appliance drains the water and acoustic signal operates (if it is active).

  • Page 23: Care And Cleaning

    ENGLISH • Remove hard stains with a special • Obey the instructions that you find on detergent. the on packaging of these products. • Wash and pre-treat heavy soil stains • Use the correct products for the type before putting items in drum and colour of the fabric, the •...
  • Page 24 Perform a maintenance wash CAUTION! regularly. To do this: Do not use alcohol, solvents • Remove all laundry from the drum. or chemical products. • Run the Machine Clean programme. For more details, refer to washing 12.2 Descaling programme table.
  • Page 25 ENGLISH 12.6 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot.

  • Page 26: Troubleshooting

    12.7 Cleaning the inlet hose and the valve filter 90˚ 12.8 Emergency drain 2. Close the water tap. 3. Put the two ends of the inlet hose in Because of a malfunction, the appliance a container and let the water flow out cannot drain the water.
  • Page 27 ENGLISH First try to find a solution to the problem • - The appliance lid is open or (refer to the table). If the problem not closed correctly. Please check the persists, contact the Authorised Service lid! Centre. • - The mains supply is unstable. With some problems, the acoustic Wait until the mains supply is stable.
  • Page 28 Problem Possible solution • Make sure that the sink spigot is not clogged. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the fil- ter, if necessary. Refer to "Care and cleaning".

  • Page 29: Technical Data

    ENGLISH Problem Possible solution After the washing cycle, • Make sure that the flap is in the correct position (left for there are some deter- powder detergent - right for liquid detergent). gent residues in the dis- • Make sure you have used the detergent dispenser accord- penser drawer.
  • Page 30 1. Push the Aan/Uit button to turn the 3. The appliance starts. appliance on. Turn the programme At the end of the programme, remove dial to set the desired programme. the laundry. 2. Set the desired options (1) by means Push the Aan/Uit button to turn the of the corresponding touch buttons.

  • Page 31: Product Information Sheet In Reference To E.u. Regulation 1369/2017

    16. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark Model L8TE73C, PNC913123845 Rated capacity in kg Energy efficiency class A+++ Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of...
  • Page 32 Energy consumption of the standard 40°C cotton pro- 0,33 gramme at partial load kWh Power consumption of the off-mode in W 0,30 Power consumption in left-on mode in W 0,30 Water consumption in litres per year, based on 220 stand- ard washing cycles for cotton programmes at 60 °C and...
  • Page 33 ENGLISH...
  • Page 34 www.aeg.com...
  • Page 35 ENGLISH...
  • Page 36 www.aeg.com/shop...

Table of Contents