Related Manuals for Vizio VWM02
Summary of Contents for Vizio VWM02
- Page 1 INSTALLATION MANUAL VWM02 Wall Mount V Inc Plasma TV VWM02 Plasma TV Wall Mount Rev 1.0 11/03...
- Page 2 Locate Wall Studs The Plasma TV is designed to mount on a wall with a minimum of 2” X 4” studs. Wall studs should run vertically (up and down) inside the wall. Use a stud finder to identify your wall stud locations.
- Page 3 Find an electrical box (light switch or power outlet) on the same wall you intend to mount the Plasma TV. Electrical boxes are always mounted to studs. Turn the power off at the electrical panel and then remove the electrical box cover.
- Page 4 Step # 5 Anchor Base Plate To Wall Step # 6 Mount Brackets on Plasma TV VWM02 Plasma TV Wall Mount Call 1-714-962-4848 Align the center of the base plate with the center point as close as possible Position the base plate so that the...
- Page 5 Step # 7 Lower Plasma TV onto Base Plate Step # 8 Tighten Thumbscrews VWM02 Plasma TV Wall Mount Call 1-714-962-4848 Pick up the screen and tilt the top slightly towards the wall Slowly lower the screen until the hooks make contact with the base plate and then carefully let the Plasma TV move into the vertical position.
- Page 6 Step # 9 Adjust Screen Angle (If Necessary) Step # 10 Position Cords VWM02 Plasma TV Wall Mount Call 1-714-962-4848 You can adjust the screen angle using the knobs located on the outside edge of each mounting bracket The knobs on both sides will have to...
Need help?
Do you have a question about the VWM02 and is the answer not in the manual?
Questions and answers