REMOTE CONTROL
The remote control provides easy access to all of the receiver's functions, including selecting channels and using the menus.
It uses infrared signals, and must be operated within three to four meters from the receiver.
When using the remote control, be sure there is a direct line of sight to the receiver. Also note that although the receiver
can be operated from the buttons on the front panel, some of the receiver's functions can only be accessed using the remote
control. The batteries for remote control are packaged separately, please install these batteries in the remote control before
using the receiver. And check battery +/-is correct. To avoid damaging the remote control, discard any depleted or old
batteries.
The buttons on the remote control are described as follows
•
Numeric Buttons
•
Switches the receiver between ON and STANDBY modes
STANDBY
•
Displays I-Plate providing information about the current channel
INFO
•
Toggles between multi-lingual Audio soundtracks
AUDIO
•
Activates the On-Screen Menu
MENU
•
Displays the complete channel/program list
LIST
•
Displays the Favorite channel list
FAV
•
Direction buttons To move through menus or submenus
•
Selects the highlighted menu or submenu item
SELECT
•
CH+/CH- Provides channel up and down functions
•
Increases or decreases audio volume
VOL+/VOL-
•
Adjusts the aspects ratio between 16:9 and 4:3
A.RATIO
- Wide Vision : to display 16:9 program on 16:9 TV screen
- Wideview Normal : to display 16:9 program on 4:3 TV screen in
- Normal Vision : to display 16:9 program cropped on 4:3 TV screen
•
Shows the multiple programs list in the same DTV Network
PIP
the receiver is tuned to and allows displaying the second program
on the TV screen
•
Selects between ANT.IN (DTV signal) and AUX (DVD or
AUX
VCR) inputs
•
Toggle between 576i, 576p, 720p and 1080i video format
V.Format
through Y/Pb/Pr video format connector
5
For entering channel number or password
to display 4:3 program on 4:3 TV screen
letterbox