Table of Contents
Advertisement
APPENDIX 2
Problem
(7) Cannot lock signal by using "Manual
Setup"
(8) No Closed Caption
(9) Cannot receive channels after moving
the receiver between cities
(for instance from New York to Los
Angeles)
* On Screen Error Message
Message
(1) Bad Signal
(2) Non Support HD Format
(3) Scrambled Channel
TROUBLE SHOOTING
(a) Check the channel number is correct according to the channel table and
updated channel table information on Appendix 1
(b) Refer to solutions in item (3) on page 24.
(a) Make sure the channel you are watching carries closed caption
information.
(b) Press TTX button on the remote control to double check there's closed
caption data output
(a) Enter into Service Mode Menu and use "Delete All Channels" clear the
channel memory, then use "Auto Installation" or "Manual Installation" to
scan through all the channels again. Please consult your local dealer for
how to entering into the Service Mode Menu
(a) Check the antenna is connected correctly and firmly to the tuner input A
(ANT A IN ) of the receiver or cable TV is connected to tuner input B
(ANT B IN) of the receiver.
(b) Refer to solutions in Item (3) on page 24.
(c) Check the digital channel whether it is out of service or not
.
(a) This message suggests when you are watching the program from AUX
input you cannot show HDTV digital channel on the small PIP screen
(a) The message suggests the program you are watching is scrambled by
the TV station, which cannot be decoded by BRAVO HD1
.
Solution
Solution
24
Advertisement
Table of Contents
