2. OPERATION CHART : MODULE QW-2285 GENERAL GUIDE Press to change from mode to mode. Pressing in any mode (except when making any settings) illuminates the display for about 3 seconds. If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen. If you do not perform any operation for a few minutes in the Data Bank Mode or Day Counter Mode, the watch automatically reverts to the normal timekeeping screen.
Page 4
DAY COUNTER MODE STOPWATCH MODE The Day Counter Mode lets you count the number of days from the Timekeeping The Stopwatch Mode lets you measure elapsed time, split 1/100 second Mode’s current date to a specific target date. times, and two finishes. The range of the stopwatch is 23 Mode indicator hours, 59 minutes, 59.99 seconds.
Page 5
OPERATION CHART : MODULE QW-2286 GENERAL GUIDE Press to change from mode to mode. Pressing in any mode illuminates the display for about 3 seconds. If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen. If you do not perform any operation for a few minutes in the Data Bank Mode or Day Counter Mode, the watch automatically reverts to the normal timekeeping screen.
Page 6
To delete a Data Bank record 3. Press to move the flashing in the sequence shown below. 1. In the Data Bank Mode, use to display the record you want to delete. 2. Hold down until the cursor appears in the display. Hour Minutes 3.
4. As for order/supply of spare parts, refer to the separate publication “GUIDEBOOK for spare parts supply”. Item Code No. Parts name Specification Applicable 7640 4260 MODULE/WITHOUT MOVEMENT QW-2285AT-09TK BG-153-1BV/2AV / BG-153B-2AV/2BV 7640 4261 MODULE/WITHOUT MOVEMENT QW-2285AT-11TK BG-153B-4V 7640 4262 MODULE/WITHOUT MOVEMENT QW-2285AT-12TK BG-153B-6V 7640 4263 MODULE/WITHOUT MOVEMENT...
6. PRECAUTIONS FOR REPAIR : QW-2285 / 2286 6-1. AC (ALL CLEAR) AND REMOVING OF MODULE 1.Perform AC (ALL CLEAR) when inserting a new battery, or else the memories and or counters may give erratic displays. Touch the AC contact and the positive (+) side of the battery or main plate with the metallic tweezers. The contact should be made for about two seconds.
Page 12
CASIO TECHNO CO.,LTD. Overseas Service Division Nishi-Shinjuku Kimuraya Bldg. 1F 5-25, Nishi-Shinjuku 7-Chome Shinjuku-k u, Tokyo 160-0023, Japan EI0100611A Printed in Japan...
Need help?
Do you have a question about the BG-153 and is the answer not in the manual?
Questions and answers