Video System Connectiong - Pioneer ELITE VSX-99 Operating Instructions Manual

CONNECTIONS
VIDEO SYSTEM CONNECTIONS
FRONT PANEL
THE S-VIDEO CONNECTORS
When using the VCR 1, LD and TO MONITOR TV jacks with
components which have S-VIDEO connectors, they can be
connected to the S-VIDEO connectors.
For the operation of components connected to S-VIDEO
connectors, refer to the instruction manuals of the
corresponding components.
NOTE:
ein this unit, the S-VIDEO connectors (Y-C separate) and the
regular pin jacks are independent, so any signal input
through a pin jack must be output from the pin jack, and any
signal input through an S-VIDEO connector must be output
through the S-VIDEO connector.
e@ Do not connect a different component to the same function's
S-VIDEO connector and regular pin jacks.
@ The S-VIDEO connector is for the video portion only, so be
sure to also make the audio connections.
VCR (for playback only), or
another component such
as a TV camera.
How to use S-VIDEO connectors
(=i)
= = S-VIDEO jack
=
Check the position of 4™
the holes and insert.
S-VIDEO plug
For the method of switching the TV monitor S-VIDEO
connector/VIDEO jack, refer to the TV monitor's instruction
manual.
VCR 2 TV Monitor
f_f
Meyayle
~ Bolen?
Do not place the AC-3
connection cord near AC wall sicket
the antenna wires or
antenna terminals.
4 ey 'Our |
D: we
Ne 6
a
pear —e)
FOU eC
RF OUT
VCR 1 LD player TV tuner
Before connecting pin jacks, speaker cables and other jacks and cables, switch power to the unit 7
<AREOS1>
OFF, and wait for about one hour. (When power is ON, the rear panel may become very hot.}