Pioneer ELITE VSX-99 Operating Instructions Manual page 31

(When using PRO-LOGIC THEATER)
SETTING THE SPEAKER MODE
e Set the SPEAKER MODE using the different buttons.
LARGE ++ SMALL
CENTER
Selects center speaker size, or NONE if no center
SPEAKER speaker is used.
ed LARGE —®» SMALL ——®» NONE =
REAR
Selects the size and number (1 or 2) of rear speakers,
SPEAKER or NONE if no rear speakers are used.
LARGE x 2—» SMALL x2 —» LARGE
iene NONE <——
SMALL qed
I S C System Control
Front Center
LARGE SMALL =» NORMAL
LARGE LARGE Sad WIDE
LARGE NONE >» PHANTOM
SUB Selects whether there is a sub-woofer or not.
WOOFER
USE ++ NONE
LFE MODE []
e Attenuate LFE (Low Frequency Effect = ultra-low bass effect for
more powerful movie sound or music) level. It changes in
sequence each time the CT] button is pressed.
Com +10 dB —»> 0dB —-» OFF 7
NOTE:
If you set to "+10 dB", front three channel (L + R + C) output
power is required for the sub-woofer. If this is more powerthan
the sub-woofer can handle, clipping may occur resulting in
distortion.
Low cuT FIL. C]
e Switch ON if the sub-woofer does not have high power handling
capabilities. (This enables bass boosting while reducing the
possibility of the sub-woofer clipping.)
ON «+ OFF
crossover [-] .
e Set sub-woofer crossover frequency (highest frequency it can
reproduce). Press [=] to lower the crossover frequency and
press [+] to raise it. (100 Hz/150 Hz/200 Hz)
CENTER DELAY
eSets center channel delay time. Press for shorter delay,
press for longer delay.
e This is possible only when the AC-3 is selected.
REAR DELAY
e@Set rear (surround) channel delay time. Press for shorter
delay, press [L] for longer delay.
@ This is possible only when the AC-3 or PRO-LOGIC is selected.
Pressing | EXIT | returns you to SOUND EDIT display.
31
<ARBIO51>