Table of Contents
Advertisement
2.6 Connecting an external Receiver/Amp
1.
Turn off the power to the Plasma TV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (gray area)
audio connectors at the rear of the Plasma TV.
3.
Turn on the power to the Plasma TV and Receiver/Amp.
4.
Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5.
Press the
select the Audio Adjust menu.
6.
Press the
select SPEAKERS.
7.
Press the
select OFF so that the sound from the
Plasma TV will now be routed through
your Receiver/Amp system.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the
Plasma TV. This is active when receiving
digital audio with the programs from the
DTV input.
Version 1/18/2006
on the remote control to
on the remote control to
on the remote control to
28
www.VIZIOCE.com
VIZIO P42 HDTV User Manual
Advertisement
Table of Contents
