Picture-In-Picture(Pip)/Picture-By-Picture(Pop)Mode; Adjusting Basic Pip/Pop Settings - Vizio P42 User Manual

3.5.12 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode

Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
MAIN
DTV
TV
AV1
AV2
AV3
Component 1
Component 1
HDMI
RGB
" " – Indicates which inputs are available for PIP and POP modes.
*When HDMI is used for the Sub-Screen it cannot support 1080i.

3.5.13 Adjusting Basic PIP/POP Settings

PIP Channel
The PIP channel is independent of the main TV channel. To change the PIP
channel, press the PIP CH + or - button on the remote control.
Swapping PIP/POP Video
You can swap the program that is in the main picture with the program in the PIP sub-picture. To swap
the main picture program with the PIP sub-picture program, press SWAP on the remote control. If you
press SWAP again, it will return the program to the main picture. This works the same if you are in the
Picture-by-Picture (POP) mode.
Version 1/18/2006
DTV TV AV1 AV2
www.VIZIOCE.com
Component Component
AV3
1
50
VIZIO P42 HDTV User Manual
HDMI RGB
2