Connecting An External Receiver/Amp - Vizio VW42L User Manual

2.7 Connecting an external Receiver/Amp

1. Turn off the power to the LCD HDTV
and Receiver/Amp.
2. Using an audio cable (white and red
connectors), connect the cable to the
audio input
Receiver/Amp and connect the other
end to the ANALOG OUT (white area)
audio connectors at the rear of the
LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen Display (OSD) menu.
5. Press the
6. Press the
7. Press the
now be routed through your Receiver/Amp system.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA input.
Version 6/19/2007
connectors on the
on the remote control to select the Audio menu.
on the remote control to select SPEAKERS
on the remote control to select OFF so that the sound from the LCD HDTV will
www.VIZIO.com
VIZIO VW42L HDTV10A User Manual
23