Vizio P4 User Manual page 56

VIZIO P4 User Guide
• Mount the Plasma + Plasma Bracket onto the Wall Plate
Make sure the moveable hooks on the Plasma Brackets are as shown in Fig 4, raise the Plasma TV (2 people
minimum recommended) and place the Plasma TV flat against the Wall Plate with all of the hooks slightly higher than
the rods on the Wall Plate. Holding it level, lower the Plasma TV to seat all four Plasma Bracket hooks, as indicated
in Fig 4. Gently pull the left and right upper edges of the Plasma TV away from the wall to extend the mount to its
maximum 12° tilt and screw in by hand the two ¼x20 Securing Knobs into the moveable hooks, one on each
mounting bracket, as shown in Fig 4.
Fig 4. Mounting the Plasma TV on the Wall Plate and Installing the Securing Knobs
55
VINC.COM