The Check In Multi-Display Mode, And Completion Of A Setup - JVC LV-N402 Instruction Manual

※ Follow the steps below to change color depth setting from 10 bpc to 8 bpc.
1. Select- "SDR (24-bit color)" in Desktop color depth (C):
2. Click- "Apply"
3. Select- "8 bpc" on the output color depth (U)
4. Click- "Apply"
(4) The check in multi-display mode, and completion of
a setup
1
If required, change the multi-display mode.
Refer to the chapter in "multi-display mode."
2
In the case of a multi-display, check the monitor of arrangement.
Display Properties>Settings (tab), click the Identification tab and check the
alignment of the display number. Combined with arrangement of the actual
monitor, and then click Apply button.
3
In the case of a multi-display, check the primary monitor.
Display Properties>Settings(tab), To designate the primary monitor, on the
Monitor tab, click the icon that corresponds to the monitor that you want to
designate as the primary monitor, and then select the "This is my main monitor"
check box.
Click OK button.
4
emove the driver DVD from the DVD-ROM drive, and setup is over.
R
( P19）
- 17 -
ENGLISH