Connecting The Power Cables; Software Installation And Setup; Installing The Display Driver Software; Software Installation - JVC LV-N402 Instruction Manual

(4) Connecting the power cables

Connect all power cables to the wall outlets, including the computer, the monitor, and
other peripheral devices.

Software installation and setup

Follow the instructions below to install the software (display driver) and set it up using
the setup program included in the accompanying driver DVD. See Q&A if any problem
occurs.

(1) Installing the display driver software

1
Click the Start and then choose the Control Panel option. Control Panel window
opens up. Choose Uninstall a program. The window opens up.
2
"NVIDIA Drivers" is chosen and clicked from the program list installed.
To Uninstall the Program, select it from the list and Uninstall button will appear.
Click Uninstall.
3
After uninstallation, a message will appear prompting you to restart your computer.
Click the "Yes", and then the computer will restart. Then uninstallation has been
completed.

(2) Software Installation

1 Turn on the monitor, start the computer.
2 Confirm that the Windows startup screen appears on the monitor.
3 Log into Windows as a user with administrative privileges.
4 Insert the driver DVD in the DVD-ROM drive.
5 Install the driver using the setup program included in the supplied driver DVD.
If the Windows security screen appears, click "Install this driver software
Note
anyway."
- 11 -
ENGLISH