Warning; Intended Use; Installation; Wires - Comelit Logos Manual

Warning

Intended use

This Comelit product is designed and manufactured for use in the creation of audio and video communication
systems in residential, commercial, industrial and public buildings.

Installation

All activities connected to the installation of Comelit products must be carried out by qualified technical
personnel, with careful observation of the indications provided in the Manuals / Instruction sheets supplied with
those products. The product must be installed to the highest standards.

Wires

Disconnect the power supply before carrying out any operations on the wiring. Use wires with a cross-section
suited to the distances involved, observing the instructions provided in the system manual. We advise against
running the system wires through the same duct as power cables (230V or higher).

Safe usage

To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets,
• make sure the system created using Comelit products has not been tampered with / damaged.

Maintenance

Comelit products do not require maintenance aside from routine cleaning, which should be carried out in
accordance with the indications provided in the Manuals / Instruction sheets.
Any repairs must be carried out:
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for the systems, by qualified technical personnel.
Do not use alcohol or aggressive products for cleaning purposes.

Disclaimer

Comelit Group S.p.A. does not assume any responsibility for
• any purpose other than the intended use,
• failure to observe the indications and warnings contained in this Manual / Instruction sheet.
Comelit Group S.p.A. reserves the right to change the information provided in this Manual / Instruction Sheet
at any time and without prior notice.

Directives

The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the
applicable directives. The full EU conformity declaration is available on the web page for the
product.
In accordance with art. 26 of Italian Legislative Decree dated 14th March 2014, no. 49
"Implementation of directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE)", the "crossed-out wheelie bin" symbol indicates that at the end of its useful life, this
product must be separated from other waste before collection for disposal. The user should
therefore take the exhausted appliance to suitable local collection centres for waste electrical
and electronic products. As an alternative to handling this process yourself, you can take the
appliance to your local equipment dealer when purchasing a new equivalent product. Electronics
dealership businesses covering an area of 400 m² are also obliged to accept waste electronic
products smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated
waste collection for the subsequent reuse of the appliance sent for recycling, processing and
environmentally conscious disposal helps to avoid potential negative effects on the environment
and human health, and encourages the reuse and recycling of the materials used in the
construction of the appliance.
7