Warning - Comelit UT1010B Technical Manual

Hide thumbs Also See for UT1010B:
Table of Contents

Advertisement

Warning

Intended use
This Comelit product is designed and manufactured for use in the creation of audio and video communication systems in residential,
commercial, industrial and public buildings.
Installation
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful
observation of the indications provided in the Manuals / Instruction sheets supplied with those products. The product must be installed
to the highest standards.
Wires
Disconnect the power supply before carrying out any operations on the wiring.
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
We advise against running the system wires through the same duct as power cables (230V or higher).
Safe usage
To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets,
• make sure the system created using Comelit products has not been tampered with / damaged.
Maintenance
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the
indications provided in the Manuals / Instruction sheets.
Any repairs must be carried out:
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for the systems, by qualified technical personnel.
Do not use alcohol or aggressive products for cleaning purposes.
Disclaimer
Comelit Group S.p.A. does not assume any responsibility for
• any purpose other than the intended use,
• failure to observe the indications and warnings contained in this Manual / Instruction sheet.
Comelit Group S.p.A. reserves the right to change the information provided in this Manual / Instruction Sheet at any time and without
prior notice.
Directives
The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the applicable directives. The full
EU conformity declaration is available on the web page for the product.
In accordance with art. 26 of Italian Legislative Decree dated 14th March 2014, no. 49 "Implementation of directive 2012/19/
EU on Waste Electrical and Electronic Equipment (WEEE)", the "crossed-out wheelie bin" symbol indicates that at the end of
its useful life, this product must be separated from other waste before collection for disposal. The user should therefore take
the exhausted appliance to suitable local collection centres for waste electrical and electronic products. As an alternative to
handling this process yourself, you can take the appliance to your local equipment dealer when purchasing a new equivalent
product. Electronics dealership businesses covering an area of 400 m² are also obliged to accept waste electronic products
smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated waste collection for the subsequent
reuse of the appliance sent for recycling, processing and environmentally conscious disposal helps to avoid potential
negative effects on the environment and human health, and encourages the reuse and recycling of the materials used in the
construction of the appliance.
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UT1010B and is the answer not in the manual?

This manual is also suitable for:

Ut1010Ut1010w

Table of Contents